Carrie M. Hall
Assistant Professor
Mechanical Materials, and Aerospace Engineering Department
Illinois Institute of Technology
Journal Publications

  1.  Xiao Huang, Lulu Kang, Mateos Kassa, and Carrie Hall. Two-Stage Functional Data Analysis for Engine Experiments with Quantitative and Qualitative Factors, submitted to Journal of Quality Technology, December 2016.
  2. Mateos Kassa, Carrie Hall, Andrew Ickes and Thomas Wallner. Modeling and Control of Cylinder-to-Cylinder Variations in Power Production in a Dual Fuel Internal Combustion Engine Leveraging Late Intake Valve Closings, International Journal of Engine Research, published online October 24, 2016.
  3. James Sevik, Michael Pamminger, Thomas Wallner, Riccardo Scarcelli, Brad Boyer, Steven Wooldridge, Carrie Hall, and Scott Miers. Influence of Injector Location on Part-Load Performance Characteristics of Natural Gas Direct-Injection in a Spark Ignition Engine, SAE International Journal of Engines, October 2016.
  4. Michael Pamminger, James Sevik, Riccardo Scarcelli, Thomas Wallner, Steven Woolridge, Brad Boyer, and Carrie M. Hall.  Evaluation of Knock Behavior for Natural Gas – Gasoline Blends in a Light Duty Spark Ignited Engine, SAE International Journal of Engines, October 2016.
  5. James Sevik, Michael Pamminger, Carrie Hall, Thomas Wallner, Riccardo Scarcelli and Scott Miers. Performance, Efficiency and Emissions Comparison of Gasoline and Natural Gas Port-Fuel Injection with Central Natural Gas Direct Injection, SAE International Journal of Engines, Paper No. 2016-01-0806, April 2016.
  6. Mateos Kassa, Carrie Hall, Andrew Ickes and Thomas Wallner. Cylinder-to-Cylinder Variations in Power Production in a Dual Fuel Internal Combustion Engine Leveraging Late Intake Valve Closings, SAE International Journal of Engines, Paper No. 2016-01-0776, April 2016.
  7. Lyle Kocher, Carrie Hall, Karla Stricker, David Fain, Dan Van Alstine and Gregory Shaver. Robust Oxygen Fraction Estimation for Conventional and Premixed Charge Compression Ignition Engines with Variable Valve Actuation, IFAC Control Engineering Practice Special Issue – Engine and Powertrain Control, Simulation, and Modeling, volume 29, pp. 187-200, August 2014.
  8. Lyle E. Kocher, Carrie M. Hall, Dan Van Alstine, Mark Magee and Gregory M. Shaver. Nonlinear Model-Based Control of Combustion Timing in Premixed Charge Compression Ignition, Journal of Automobile Engineering, volume 228, no. 7, pp. 703-718, June 2014.
  9. Carrie M. Hall, Gayatri H. Adi, Gregory M. Shaver, and Bernard Tao. A Robust Fuel Flexible Combustion Control Strategy for Biodiesel with Variable Fatty Acid Composition During Mixing Controlled Combustion, International Journal of Engine Research, volume 15, no. 2, pp. 165-179, February 2014.
  10. Gayatri Adi, Carrie Hall, David Snyder, Bryan Belt, and Gregory M. Shaver. Fuel Flexible Engine Control of Biodiesel Blends During Mixing Controlled Combustion, ASME Journal of Dynamic Systems, Measurement, and Control, volume 135, no. 6, August 2013.
  11. Carrie M. Hall, Dan Van Alstine, Lyle Kocher, and Gregory M. Shaver. Closed Loop Combustion Control of Biodiesel/Diesel Blends in Premixed Operating Conditions Enabled Via High Exhaust Gas Recirculation Rates, Journal of Automobile Engineering, volume 227, no. 7, pp. 966-985, July 2013.
  12. Carrie M. Hall, Gregory M. Shaver, Jonathan Chauvin, and Nicolas Petit. Control-Oriented Modeling of Combustion Phasing for a Fuel-Flexible Spark-Ignited Engine with Variable Valve Timing, International Journal of Engine Research, volume 13, no. 5, pp. 448-463, October 2012.
  13. David Snyder, Gayatri Adi, Carrie Hall, and Gregory M. Shaver. Control Variable Based Accommodation of Biodiesel Blends, International Journal of Engine Research, volume 12, no. 6, pp. 564-579, December 2011.
  14. Michael Bunce, David Snyder, Gayatri Adi, Carrie Hall, Jeremy Koehler, Bernie Davila, Shankar Kumar, Phanindra Garimella, Don Stanton, and Greg Shaver. Optimization of Soy-Biodiesel Combustion in a Modern Diesel Engine, Fuel, volume 90, issue 8, pp. 2560-2570, August 2011.
  15. Michael Bunce, David Snyder, Gayatri Adi, Carrie Hall, Jeremy Koehler, Bernie Davila, Shankar Kumar, Phanindra Garimella, Don Stanton, and Greg Shaver. Stock and Optimal Performance and Emissions with 5 and 20% Soy-Biodiesel Blends in a Modern Common Rail Turbo-Diesel Engine, Energy and Fuels, volume 24, no. 2, pp. 928–939, February 2010.
  16. Gayatri Adi, Carrie Hall, David Snyder, Michael Bunce, Christopher Satkoski, Shankar Kumar, Phanindra Garimella, Donald Stanton, and Gregory Shaver. Soy-Biodiesel Impact on NOx Emissions and Fuel Economy for Diffusion Dominated Combustion in a Turbo-Diesel Engine Incorporating EGR and Common Rail Fuel Injection, Energy and Fuels, volume 23, no. 12, pp. 5821–5829, October 2009.

Conference Proceedings

  1. Michael Pamminger, James Sevik, Riccardo Scarcelli, Thomas Wallner, and Carrie Hall. High Load Performance and Knock Behavior for Gasoline Port-Fuel Injection, Natural Gas Direct Injection and Blended Operation for Increased Compression Ratio in a Spark Ignition Engine, SAE 2017 World Congress, submitted September 2016.
  2. Mateos Kassa, Carrie Hall, Andrew Ickes, and Thomas Wallner. Feed-Forward Control of Fuel Distribution on Advanced Dual-Fuel Engine with Varying Intake Valve Closing, SAE 2016 International Powertrains, Fuels and Lubricants Meeting, October 2016.
  3. Carrie Hall, James Sevik, Michael Pamminger, and Thomas Wallner. Hydrocarbon Speciation in Blended Gasoline-Natural Gas Operation on a Spark-Ignition Engine, SAE 2016 International Powertrains, Fuels and Lubricants Meeting, October 2016.
  4. Michael Pamminger, James Sevik, Carrie Hall, Thomas Wallner, Riccardo Scarcelli and Scott Miers. Performance, Efficiency and Emissions Comparison of Gasoline Port-Fuel Injection, Natural Gas Direct Injection and Blended Operation, ASME Internal Combustion Engine Conference, October 2016.
  5. Siwei Dong and Carrie Hall. Model-Based Control of Integrated Diesel Engine and Selective Catalytic Reduction Systems, Proceedings of the 2016 American Control Conference, July 2016.
  6. Mateos Kassa, Carrie Hall, Andrew Ickes and Thomas Wallner. In-cylinder Oxygen Mass Fraction Estimation Method for Minimizing Cylinder-to-Cylinder Variations in Advanced Combustion Engines, SAE Technical Paper 2015-01-0874, SAE 2015 World Congress, April 2015.
  7. Carrie M. Hall, Dan Van Alstine, and Gregory M. Shaver. Flatness-Based Control of Mode Transitions between Conventional and Premixed Charge Compression Ignition on a Modern Diesel Engine with Variable Valve Actuation, Proceedings of the 2013 ASME Dynamic Systems and Control Conference, October  2013.
  8. Gayatri Adi, Carrie Hall, Gregory M. Shaver, and Bernard Tao. Diesel Engine Control Strategy for Biodiesel Blend Accommodation Independent of Fuel Fatty Acid Structure, Proceedings of the 2012 IFAC Workshop on Engine and Powertrain Control, Simulation and Modeling, October  2012.
  9. Carrie M. Hall, Dan Van Alstine, Lyle Kocher, Gregory Shaver, and Derek Lee. Combustion Timing Modeling and Control Framework for Biodiesel/Diesel Blends during Pre-mixed Combustion, Proceedings of the  2012 ASME Dynamic Systems and Control Conference, October 2012.
  10. Carrie M. Hall, Gregory M. Shaver, Jonathan Chauvin, and Nicolas Petit. Combustion Phasing Model for Control of a Gasoline-Ethanol Fueled SI Engine with Variable Valve Timing, Proceedings of the 2012 American Controls Conference, June  2012.
  11. Gayatri Adi, Carrie Hall and Gregory Shaver. Closed-Loop Control of Fuel-Flexible CI engines, Proceedings of the 3rd International Conference on Advances in Energy Research, December 2011.
  12. David Snyder, Gayatri Adi, Carrie Hall, Mike Bunce, Gregory Shaver. Closed-Loop Control Framework for Fuel-Flexible Combustion of Biodiesel Blends, Proceedings of the 2010 ASME Internal Combustion Engine Division Fall Technical Conference, September 2010.
  13.  Mike Bunce, David Snyder, Gayatri Adi, Carrie Hall, Bernie Davila, and Gregory M. Shaver. Optimization of the Performance and Emissions of Soy Biodiesel Blends in a Modern Diesel Engine, Proceedings of the 2010 ASME Internal Combustion Engine Division Fall Technical Conference, September 2010.
  14. David Snyder, Gayatri Adi, Michael Bunce, Carrie Hall, and Gregory M. Shaver, Dynamic Exhaust Oxygen Based Biodiesel Blend Estimation with an Extended Kalman Filter, Proceedings of the 2010 American Control Conference, June 30-July 2, 2010.
  15. Gayatri Adi, C. Hall, D. Snyder, M. Bunce, and G. M. Shaver. Clean and Efficient Fuel-Flexible Combustion via Closed-Loop Control, Proceedings of the 2nd International Conference on Advances in Energy Research, December 2009.
  16. Gayatri Adi, C. Hall, M. Bunce, D. Snyder, and G. M. Shaver. Capturing Experimentally Observed, Biodiesel-Induced Increases of Fuel Consumption and NOx with a Physics-Based Whole Engine Model, Proceedings of the 2009 ASME Internal Combustion Engine Division Spring Technical Conference, May 2009.
  17. Carrie Hall. Manufacturing a Calibration Device for Orientation Sensors, Proceedings of the 2007 National Conference on Undergraduate Research, April 2007.

Other Publications

​PhD Thesis: 
Carrie Hall, Fuel-Flexible Combustion Control of Modern Compression-Ignition and Spark-Ignition Engines, PhD thesis, Purdue University, 2012.


Patents:
Provisional Patent: Methods for Controlling Combustion of Blended Biofuels, Application Number: 61/291,383, Provisional Filing date: 12/31/2009, Gregory Shaver, David Snyder, Carrie Hall, Gayatri Adi, and Michael Bunce, Full application filed: 12/31/2011.

Patent application: Oxygen Fraction Estimation for Diesel Engines Utilizing Variable Intake Valve Actuation, Patent Number: US20140060506, Filing Date: 9/3/2013, Publication Date: 3/6/14, Gregory Shaver, Lyle Kocher, Carrie Hall, Karla Stricker, Dan Van Alstine, David Fain.

Patent application: A Nonlinear Model-based Controller for Premixed Charge Compression Ignition Combustion Timing in Diesel Engines, Patent Application Number: 14/651,521, Filing Date: 12/12/2013, Publication Date: 6/9/14, Amended 6/11/15, Gregory Shaver, Lyle Kocher, Carrie Hall, Dan Van Alstine, Mark Magee.

Book:
Chris Eboch, (2014). Amazing Feats of Mechanical Engineering. Carrie Hall (Content Consultant). Minneapolis, MN: Abdo Publishing.